Twin Lobe Blowers are specifically for aeration application in the ETP and STP operations. These blowers work on the positive displacement principle & are primarily used in ETP water tanks to provide air at higher pressures for making the microorganism alive so that they can decompose the waste and the treated water can be used for the general application like sanitation and gardening purpose.
As the Air Blowers operate in open condition exposing the suction to the atmosphere and exhaust to the desired tank, need of filters & silencers arrive at the suction of the blower. These blowers are constructed with special materials and are enhanced with proper lubrication and sealing arrangements. This makes them an ideal choice for ETP& STP operations.
These air blowers ensure you for 100% oil free air delivery making them 100% dry type blowers & are made of Spheroidal Graphite Iron and alloy steel gears and shaft. This MOC selection makes these blowers significant and outstanding in terms of other traditional machines.
The blowers are manufactures on state-of-the-art latest CNC machines & are machined to close tolerance levels with a high degree of accuracy by profile machining which ensures high volumetric efficiency with reduced power consumption.
These can come as single stage or in parallel configuration depending upon the flow rate required for the process for which these are used.We can achieve flow rates from 25 m3/hr to 10,000 m3/hr in single stage & amp; up to any capacity in parallel configuration, for working pressures up to 1 Kg/cm2.
These machines are extensively used in pneumatic conveying, cement plants,effluent treatment plants for aeration,blending of powder material,water treatment plants for backwashing of filters,aquaculture, electroplating etc.
These air blowers are positive displacement type, and they do not develop any pressure within the casing but their discharge pressure depends totally on the system resistance or back pressure.By using a very small operational clearance to enhance the effective sealing of the compressor Inlet area from the discharge area, eliminates the need of any internal lubrication of the lobes.The air thus delivered is 100% oil FREE.
The heat generated due to air compression naturally raises the temperature of the discharged air. The system should be able to account for temperature increase at a rate of about 100 degrees Celsius (180 degrees Fahrenheit) for every 0.1 Kg/cm2 (9.8 kN/m2 or 1.422 Psi) increase in pressure.
Our machine is one of the most efficient and high-performance equipment available in the market for a wide variety of industrial needs. They bring several advantages due to their extensive range of features, some of which are listed here.